728x90 AdSpace

Latest News
Thursday, June 19, 2014

Make a 'shiny' Part in Headlamp

Have a clear view to the headlamp on your car, would always be the desire of every owner. From the previous tips, has provided a way to create the look of the new headlamp like, especially on the outside. Now, to make it more steady with the clear outside, you can do some of the following methods. The first thing you should do is set up the tool and the material beforehand. If you've successfully removed the headlamp from his home. Prepare A powerful 500-watt hairdryer and above, pliers, detergent, water, wash brushes and a plus minus screwdriver and supporting equipment as needed.

Preheat the connection between the shell lamps with mica using haiirdryer. After tolerable can be plucked out, using a screwdriver to do it slowly so the glass is not broken. If sealentnya hardened again, heat with a hair dryer again to make it more soft and easily taken out again. If the glass has been dislodged, vicious cycle wash on parts such as glass, reflector and headlamp shell. If the headlamp is made of acrylic glass, do not need to be brushed, enough on lap course with a cloth / foam. As for the reflector, just wipe with a damp cloth gently and slowly so as not to leave scratches.

When finished cleaning, dry all components using a clean cloth and do not notice until there is remaining fabric fibers. If necessary, do the drying by evaporation of water remnants using a hairdryer. But do not get too close to the reflector because it could melt. Finally, attach the glass again to batoknya again as before. The trick is similar to the way menegeluarkannya, the heat sealant first. Squeeze all the parts and look back, how clear your headlights now?

I hope this information about Make a 'shiny' Part in Headlamp is useful.....

  • Blogger Comments
  • Facebook Comments
Item Reviewed: Make a 'shiny' Part in Headlamp Rating: 5 Reviewed By: sri purwaningsih